Frost-Stick Dry Ice Machine for Bulk Tanks ~(includes Shipping US 48 States)~ $98.00

You will need a Bulk Tank (350psi Cryotank) of Liquid CO2. See Link; CO2 Supply.
Attach the Frost-Stick to the Liquid outlet of your Bulk CO2 tank (with CGA-320 Fittings) using an Adjustable wrench. Open the cylinder valve and direct the nozzle into 5 gallon bucket or other container.
One way to use your dry ice, is to spread a couple layers of newspaper on a hard surface. Dump the Dry Ice onto newspaper. Wrap your dry ice like a burrito in the newspaper, tape it shut, and put it in your cooler.
Another way to pack dry ice is by packing it into a small cardboard box. Pack it down with a 2x4, and tape it shut. Put the cardboard box into your cooler or insulated container.

Makes Dry Ice Snow at the rate of 1+ lbs every Minute

Bulk tanks are slightly more complicated to use than High Pressure tanks. You must regulate the internal pressure above 200 psi while dispensing the liquid CO2 to keep your tank contents from freezing up. We include a total of three different nozzles that you may need to change out depending on your tank's delivery capacity. If your hose is freezing up or you are not making about a pound per minute of dry ice then you can use the various nozzles to adjust your dry ice machine for best performance. (requires sockets and extensions. make sure you use the hex fitting at the back of the device to hold it while you unscrew and reinstall the the nozzles).

For Bulk (396lb) CO2 tanks with liquid CGA-320 fittings.

You MUST have a valve for dispensing LIQUID CO2, you CANNOT make dry ice with gas, it must be liquid in the hose for it to work

Frost-Stick Dry Ice Machine for Bulk Tanks ~(includes Shipping US 48 States)~ $98.00